CASE W20C WHEEL LOADER

The Case W20C Wheel Loader is a robust and versatile machine designed for demanding material handling tasks. It features a 6-cylinder Case A504BD diesel engine with a displacement of 504.1 cubic inches, delivering 123 horsepower at 2200 rpm and 375 lb-ft of torque at 1400 rpm. The loader is equipped with a power shift transmission, offering four forward and two reverse gears for smooth and efficient operation. The hydraulic system is dual-stage, with a pump flow capacity of 48.1 gallons per minute, enabling fast cycle times: bucket dump in 1.7 seconds, lower in 3.5 seconds, and raise in 6.1 seconds. The W20C has a heaped bucket capacity of 1.8 cubic yards and a struck capacity of 1.5 cubic yards, with a maximum hinge pin height of 11.7 feet and a reach at max lift and dump of 3.2 feet. The machine measures 20.1 feet in length with the bucket on the ground, 10.3 feet in height to the top of the cab, and 7.6 feet in width over tires, with a wheelbase of 9 feet and 1.5 feet of ground clearance. Operating weights and fluid capacities include a 50-gallon fuel tank, 31-gallon hydraulic system, 13-gallon cooling system, 4.3-gallon engine oil, 8-gallon transmission, and 3.5-gallon each for front and rear axle/diff. The loader runs on a 24-volt electrical system with a 40-amp alternator. Maximum forward speed is 23.3 mph, and reverse speed is 9.7 mph, making it suitable for a wide range of construction and industrial applications.