CAT 140M AWD MOTOR GRADERS

The 2016 CAT 140M AWD Motor Grader features a Tier 4 Final/Stage V compliant engine with a base machine weight of 33,250 lb and a typically equipped weight of approximately 34,839 lb. It operates with an AWD transmission offering 8 forward and 6 reverse gears. Engine power ranges from 139 hp to 180 hp depending on gear and conditions when AWD is engaged. The grader provides extensive blade control capabilities with maximum blade lift 18.9 in above ground, a cutting depth up to 28.9 in, and moldboard side shifts of 26.1 in (left) and 20.2 in (right). Blade tip angles range from 40° forward to 5° backward. The machine supports a blade pull advantage up to 39,683 lb and a blade down force advantage up to 23,878 lb at maximum GVW. The front axle carries 8,893 lb while the rear axle supports 24,357 lb. Tandem oscillation angles are 15° front and 22° rear, enabling enhanced terrain adaptability. The hydraulic system is a closed-center design with variable piston pumps delivering flows around 40-56 gal/min at pressures near 3,500 psi, supporting precise blade and steering movements. Fuel tank capacity is approximately 15.8 gallons. Operator controls include traditional hydraulic levers and optional advanced grade control systems utilizing GPS or laser guidance for improved grading accuracy. Overall, the 2016 CAT 140M AWD Motor Grader combines robust power, precise blade manipulation, and sophisticated control systems optimized for productivity and efficiency in grading applications. Specific dimensions and speeds vary based on configurations.