CATERPILLAR IT38G WHEEL LOADER

The Caterpillar IT38G is a versatile integrated tool carrier wheel loader featuring a fixed front axle with an oscillating rear axle allowing ±12° articulation and a maximum single-wheel rise and fall of 16.5 inches (41 cm). It is powered by a Cat 3126 DITA engine delivering 160 hp (119 kW) net power and a maximum torque of 619 lb-ft. The engine displacement is 439 cubic inches with a 4.3-inch bore and 5-inch stroke. Hydraulics are driven by a piston pump with a 43 gallons per minute flow capacity and a relief valve pressure setting of 3597 psi, enabling efficient cycle times including 2-second dump and 5.8-second raise. The IT38G offers bucket capacities ranging from 2.9 to 3.3 cubic yards (2.2 to 2.5 m³), with a heaped capacity of 2.8 cu yds (2 m³) and a breakout force up to 28,575 lbs (12,962 kg). It features full-hydraulic actuated oil-disc brakes and full-hydraulic power steering. The machine’s operating weight is approximately 28,714 lbs (13,025 kg) with a wheelbase of 10 feet and a width across tires of 8.5 feet. Dimensionally, the loader reaches a max lift height of 11.8 ft (3.6 m) with a hinge pin height of 13.4 ft (4 m) and a dump clearance near 9 ft (2.7 m). It supports a variety of attachments that can be changed in under 30 seconds with an electrically actuated quick coupler system. The transmission is a 4-speed powershift with a top speed of 24.1 mph (39 km/h). Fuel capacity is 67.9 gallons (254 L), supporting extended operational periods. This model meets SAE and ISO standards for durability and performance in demanding construction and material handling applications.