CHAMPION 715A MOTOR GRADERS

The Champion 715A Motor Grader is a versatile earthmoving machine designed for road construction, maintenance, and land grading applications. It features a 12-foot moldboard with a 24-inch height and 0.87 to 1-inch thickness, delivering precise blade control through an approximate 16.3-inch arc radius and 4.4 to 5-inch throat clearance. The cutting edge spans 6 inches wide with variable thickness, enabling effective material removal with a maximum depth of cut reaching 18.5 to 30.5 inches and lift capability of 15.7 to 18.9 inches above ground. The blade articulates to 40 degrees forward and 5 degrees backward, with maximum shoulder reach extending approximately 75 inches right and 68 to 91 inches left for enhanced operational flexibility. Power derives from a six-cylinder engine producing 176 to 213 horsepower at 1800 to 2200 rpm, with displacement ranging from 7.01 to 12.5 liters. The transmission delivers speeds up to 31.4 mph forward and 24.8 mph reverse. Operating weight varies by configuration from approximately 24,665 to 41,603 pounds, accommodating diverse job requirements. The articulated frame permits up to 20-degree left and right steering angles with 18-degree front axle lean for superior maneuverability on challenging terrain. Ground clearance at the rear axle measures 13.7 to 15.6 inches. Hydraulic systems utilize closed-center, variable displacement piston pumps delivering 40 to 45 gallons per minute, supported by fuel tanks holding 60 to 70 gallons, ensuring sustained operational capability during extended work cycles.