DYNAPAC CC1300C PLUS STATIC SMOOTH DRUM ROLLER

Technical Description

The Dynapac CC1300C Plus is a static smooth drum roller designed for efficient compaction in urban and confined areas, weighing approximately 8,600 lbs. It features a 32-inch diameter, 51-inch wide steel drum with 0.6-inch thickness, providing a static linear load of 83 pounds per inch and a centrifugal force of 8,100 lbs at high vibration frequency (53 vpm) with a nominal amplitude of 0.1 inches. The machine is powered by a Tier 4i compliant Kubota V2203-M water-cooled engine delivering 45 hp at 2,600 rpm, supported by a 13-gallon fuel capacity and 10.6 gallons engine oil capacity. Its hydraulic system supports hydrostatic service braking in both forward and reverse, supplemented by a failsafe multidisc parking brake on drums and wheels for safety. The CC1300C Plus offers a 37% gradeability and a top speed of 6 mph. Dimensions include a curb clearance of 24 inches, ground clearance of 10 inches, 107 inches overall length, 4.2 feet width, with a 9-foot cab height. It has a 76-inch wheelbase with turning radii of 10 feet (inside) and 14 feet (outside), paired with 8.7-inch track widths for maneuverability. A 53-gallon water spray system ensures drum surface moisture control to prevent asphalt adhesion. Steering angle is 30 degrees, enhancing operational flexibility. This roller’s design emphasizes operator safety, comfort, and efficiency for smooth compaction on asphalt and similar surfaces in tight environments.