DYNAPAC CC425 STATIC SMOOTH DRUM ROLLER

The Dynapac CC425 is a high-performance double drum vibratory roller designed for efficient compaction in road construction and similar applications. It features 1690 mm wide steel drums with a shell thickness of 17 mm and a diameter of 1220 mm, providing a static linear load of approximately 28 kg/cm. The roller delivers powerful compaction forces with centrifugal forces of up to 130 kN and variable vibration frequencies at 36 and 54 Hz. Its nominal amplitudes range from 0.9 mm to 0.4 mm, optimized for compacting both thin and thick asphalt layers. Powered by a robust 76 hp (57 kW) Kirloskar 4R1040TC turbocharged, intercooler, BSIII diesel engine, the CC425 ensures reliable and efficient operations. This engine runs at 2200 rpm, meeting applicable emission standards. The roller boasts a maximum operating mass around 9200 kg and a maximum travel speed of 7.5 mph (12 km/h), with a maximum gradeability of 39%, enabling effective operation on slopes. Dimensionally, the unit measures approximately 4340 mm in length, 1885 mm in width, and up to 3060 mm in height with canopy, featuring a curb clearance of about 370 mm and ground clearance near 282 mm. Its turning radius is 6.5 meters with a steering angle of ±28°, assisted by a hydrostatic steering system for precise maneuverability. The CC425 includes a water spray tank with a capacity around 250 liters to prevent asphalt adhesion during compaction, and a fuel tank capacity near 180 liters for extended operation. The hydraulic system employs axial piston pumps with variable displacement for driving and vibration, with hydrostatic service brakes and failsafe multidisc parking brakes for safety and control. Its oscillating angle reaches ±7°, aiding compacting on uneven surfaces. The Dynapac CC425 stands as a versatile and durable roller for a variety of heavy-duty compaction tasks.