1997 FADAL VMC3020HT VERTICAL MACHINING CENTER

Technical Description

The 1997 Fadal VMC3020HT is a 3-axis vertical machining center combining the wider table configuration of the VMC3020 with Fadal's high-torque spindle package. The HT designation identifies a spindle drive configured for elevated torque output at lower RPM ranges, making this variant particularly well suited to heavy-cut operations in steel, stainless steel, titanium, and other difficult-to-machine materials where torque at the cutting zone is the primary constraint. Axis travels are 30 inches in X, 20 inches in Y, and 20 inches in Z, with a worktable measuring 30 by 20 inches equipped with standard T-slots for workholding. The wider 20-inch Y travel provides increased flexibility for multi-vise and tombstone setups compared to the VMC3016HT, while the high-torque spindle drive delivers enhanced material removal rates in tough alloys. The spindle accepts CAT40 tooling and operates at a standard maximum speed of 7,500 RPM, with the continuous power rating at 15 HP. The machine is equipped with the Fadal CNC 88HS control, offering conversational and G-code programming, rigid tapping, and DNC compatibility. The automatic tool changer provides tool management for multi-operation production cycles. Overall machine dimensions are approximately 80 inches long by 72 inches wide by 84 inches tall, and the machine weighs approximately 15,000 pounds. The robust cast-iron construction supports the rigidity required for heavy cutting passes. The VMC3020HT is appropriate for production environments that prioritize cutting force and material removal rate on harder workpiece materials rather than high-speed finishing cycles.