HAMM DV PLUS 90I VV-S STATIC SMOOTH DRUM ROLLER

Technical Description

The HAMM DV PLUS 90i VV-S is a vibratory smooth drum roller designed for efficient and high-quality compaction. It features a 66.2-inch-wide smooth divided drum with a diameter of 47.3 inches and 0.7-inch thickness, delivering centrifugal forces of 18,884 lbs at high and 17,535 lbs at low vibration levels. The drum produces a nominal amplitude of 0.1 inches and operates at vibration frequencies of 42 and 50 vibrations per minute, offering consistent compaction performance with a static linear load of 167.5 pounds per inch. Powered by a DEUTZ TCD 3.6 L4 engine, this model meets EPA Tier 4 emissions standards and outputs 99.8 hp at 2200 rpm from its four-cylinder unit. The machine weighs approximately 27,249 lbs and supports a fuel capacity of 42.3 gallons, allowing extended operation. Its ground clearance is 26.2 inches, with an overall length of 175.2 inches and width of 6.2 feet. The turning radius inside is 9.9 feet with a 128-inch wheelbase for responsive maneuverability. Featuring an oscillating angle of 4 degrees, the roller enhances surface adaptability and compaction uniformity. The water spray system holds 241.2 gallons to maintain drum cleanliness and material bonding during operation. It operates at a working speed of 6.9 mph, combining performance and control for smooth asphalt and soil compaction in diverse construction environments. HAMM’s advanced machine management system optimizes fuel use, vibration control, and drive torque distribution for superior efficiency and safety.