HAMM H 5I STATIC SMOOTH DRUM ROLLER

The HAMM H 5i is a smooth drum vibratory roller designed for efficient compaction in road construction and site development. It features a 54-inch wide smooth steel drum with a diameter of 39.4 inches and a thickness of 0.8 inches, providing a static linear load of 107.6 lb/in. The vibratory mechanism operates at a frequency of 30 vibrations per minute (30 Hz) with a nominal amplitude of 0.1 inches, generating a centrifugal force of approximately 15,511.9 lbs to ensure effective soil and asphalt compaction. Powered by a Deutz 4-cylinder diesel engine delivering 73.3 horsepower at 2200 rpm, the roller meets stringent EU Stage V / EPA Tier 4 emission standards and employs DOC-DPF exhaust gas after-treatment for reduced emissions. The machine’s operating width is 59 inches with an inside turning radius of 132 inches, allowing precise maneuverability. It has a wheelbase of 85.36 inches and a ground clearance of 10.63 inches, with an overall length of 159.06 inches and height to the cab top of 9.41 feet. The HAMM H 5i can reach a working speed of 6 mph and a transportation speed up to 12 mph. The roller’s operating weight is approximately 11,100 lb with the cabin and can handle a maximum weight of 13,316 lb, evenly distributed with a front axle load of 5,787.2 lb and rear axle load of 5,313.2 lb. Fuel capacity is 32.5 gallons, supporting extended operation on job sites. This compact, high-performance roller supports efficient, precise compaction in various construction applications.