HAMM H20I C STATIC SMOOTH DRUM ROLLER

The HAMM H20i C is a high-performance vibratory smooth drum roller designed for efficient soil compaction. It features a smooth drum 84.3 inches (2140 mm) wide with a diameter of 63 inches (1600 mm) and a thickness of 1.8 inches (45 mm), delivering a high static linear load of 621 pounds per inch. The drum generates centrifugal forces of 74,411.8 lbs on high and 54,403.8 lbs on low settings, with nominal vibration amplitudes of 0.1 inches at frequencies of 27 and 30 vibrations per minute (vpm), ensuring thorough ground compaction. The machine operates via articulated steering with a 10-degree oscillating angle, providing excellent maneuverability with a 13.8 ft inside turning radius. Powered by a Deutz TCD 6.1 L6 diesel engine, it offers 214.6 hp at 2300 rpm, complying with EU Stage IV and EPA Tier 4 emissions standards through DOC-DPF-SCR exhaust gas recirculation technology. It holds a fuel capacity of 74 gallons with an 8.5-gallon standard diesel tank. The H20i C has a maximum operating weight of 48,744 lbs and a top speed of 10 mph, with axle loads of approximately 29,310 lbs front and 15,058 lbs rear. Dimensions include a length of 259.9 inches, width over cab 90.9 inches, height to cab top 9.8 feet, and ground clearance of 15.4 inches. The rear tyres measure AW 23.1-26 12 PR, ensuring stability on various slopes, with front and rear driving slope angles of 43 and 28 degrees, respectively. This combination of power, precision, and design makes the H20i C suitable for demanding compaction tasks in construction and infrastructure projects.