HYSTER H230HD2S SIT-DOWN FORKLIFT

The Hyster H230HD2S is a heavy-duty rough terrain forklift engineered for demanding industrial applications. It features a robust Cummins QSB 4.5 diesel engine with 4 cylinders, delivering 159.6 hp at 2300 rpm and peak torque of 460.3 lb-ft at 1500 rpm, ensuring substantial power output for tough operations. The forklift’s load capacity is rated at 23,000.9 lbs with a load center of 24.1 inches, supported by an efficient powershift transmission (ZF WG161) with 3 forward and 3 reverse speeds for versatile speed control. Its lift mast offers a lift speed of 79 ft/min and a lower speed of 98 ft/min, with mast tilt angles of 15 degrees forward and 12 degrees rearward, optimizing load handling and maneuverability. Dimensionally, the H230HD2S has an overall width of 8.1 ft, a length to fork face of 14.2 ft, and a height of 11.5 ft with the mast lowered. The forklift boasts a sturdy wheelbase of 8.9 ft and a turning radius of 12.9 ft, enhancing its ability to operate in confined spaces. Ground clearance stands at 9.9 inches while gradeability reaches 44%, allowing operation on challenging terrain. It runs on pneumatic tires, with front tires sized 10.00-20 16PR on 4 wheels and rear tires of the same size on 2 wheels. The braking system combines a spring-applied dry disc parking brake on the drive axle and oil-immersed wet disc service brakes for reliable stopping power. With a fuel capacity of 27.5 gallons, hydraulic fluid capacity of 35.7 gallons, and an oil system capacity of 26.5 gallons, this forklift sustains extended operation times. The operating weight is 31,510.7 lbs, supported by a 24-volt electrical system with a 120-amp alternator, highlighting its durability and operational reliability in heavy material handling environments.