HYSTER H330HD2S SIT-DOWN FORKLIFT

The Hyster H330HD2S is a robust rough terrain forklift engineered for heavy-duty lifting applications with a rated load capacity of 33,000 lbs at a 24.1-inch load center. It is powered by a Cummins QSB 6.7L Tier 3 diesel engine delivering 155 hp at 2300 rpm and 440 lb-ft of torque at 1500 rpm, supported by a 120-amp alternator and a 102 Ah battery. The forklift features a powershift ZF / WG161 transmission with 3 forward and 3 reverse speeds, enabling a maximum travel speed of 17 mph. The drive system incorporates a spring-applied, dry disc parking brake on the drive axle and oil-immersed wet disc service brakes, ensuring reliable stopping power. Dimensional characteristics include an overall length to fork face of 16.4 ft, an overall width of 8.4 ft, a wheelbase of 10.9 ft, a ground clearance of 9.7 inches, and a height to the top of the overhead guard of 10.1 ft. The mast offers a forward tilt of 15 degrees and a rear tilt of 12 degrees with lift speed rated at 71 ft/min and lowering speed at 98 ft/min. The turning radius is 15.1 ft, optimized for maneuverability in confined spaces. The forklift rides on pneumatic tires sized 12.00-20 20PR, with a tire configuration of four front wheels and two rear wheels. It has a fuel capacity of 42 gallons and a hydraulic system fluid capacity of 37 gallons, with an oil system fluid capacity of 26.4 gallons. Front axle load is 68,484 lbs, rear axle load 5,644 lbs, and drawbar pull rated at 20,700 lbs. The operating weight is approximately 41,127 lbs with an operating voltage of 24 volts, making the Hyster H330HD2S a powerful and dependable machine suitable for demanding industrial environments.