HYSTER H450HDS SIT-DOWN FORKLIFT

Technical Description

The Hyster H450HDS is a robust heavy-duty forklift engineered for demanding material handling applications, delivering a **load capacity of 45,000 lbs** at a 36-inch load center. It is powered by a **Cummins QSB 6.7L Tier 4F diesel engine**, producing **220 hp at 2000 rpm** and **700 lb-ft of torque at 1500 rpm**, ensuring high torque for heavy loads. The forklift incorporates a **powershift ZF WG 211 transmission** with 5 forward and 3 reverse speeds for smooth operation and efficient power delivery. Its braking system features a **dry disc parking brake on the drive axle** and an **oil-immersed (wet) disc service brake** for reliable stopping power. The machine offers substantial maneuverability with a **16.2 ft turning radius** and a **ground clearance of 14.8 inches**. Key dimensions include an overall width of 9.6 ft, a wheelbase of 11.5 ft, and a height to the top of the overhead guard of 11.1 ft. The forklift has an overall height of 13.9 ft with the mast lowered and achieves a maximum fork height of 15.3 ft. The H450HDS is built for robustness and endurance with an operational weight of approximately 61,963 lbs. It features pneumatic tires (14.00 x 24 front and rear) for rough terrain use and a drawbar pull of 43,500 lbs. The hydraulic system holds 54 gallons, and the forklift contains an 80-gallon fuel tank plus a 10-gallon Diesel Exhaust Fluid (DEF) tank for emissions compliance. Performance highlights include a lift speed of 49 ft/min, a lower speed of 98 ft/min, and a maximum travel speed of 16 mph. The forklift supports 24-volt electrical operation with a 900 CCA battery and a 120-amp alternator, combining durability, power, and compliance with Tier 4 Final emissions standards suitable for heavy industrial applications.