HYSTER J110XN SIT-DOWN FORKLIFT

Technical Description

The Hyster J110XN is a robust 4-wheel electric forklift designed for heavy-duty material handling with a load capacity of 11,000 lbs at a 24-inch load center. It operates on an 80-volt electric system powered by a Hyster engine delivering 19.7 hp (14 kW). The forklift features spring-applied parking brakes and hydraulic service brakes, ensuring reliable stopping power. The hydraulic system operates at a relief valve pressure of 2250 psi with an auxiliary hydraulic flow of 15.9 gallons per minute, supporting smooth and efficient lifting operations. The mast is equipped with forward and rear tilt angles of 6 and 8 degrees respectively, with lift and lower speeds of 91 and 71 feet per minute, optimizing load control. Dimensions include an overall height of 7.7 feet (mast lowered), width of 4.8 feet, length to fork face of 10.3 feet, and a turning radius of 8.5 feet, providing maneuverability in tight spaces. It offers a gradeability of 21.5% and ground clearance of 5.7 inches. The forklift rides on pneumatic shaped solid tires sized 355/50-15 at the front and 28 x 9-15 at the rear, with two wheels on each axle supporting a front axle load of 9,839 lbs and rear axle load of 9,484 lbs. Maximum travel speed reaches 11.7 mph (18 kph) with a drawbar pull of 4,020 lbs. The operating weight for the J110XN is approximately 13,931 lbs. Ergonomically designed, the operator benefits from ample foot room, adjustable cushioned armrest with hydraulic controls, and optimized pedal placement for comfort and efficiency in operation.