HYSTER S35FT (FORTIS) SIT-DOWN FORKLIFT

The Hyster S35FT (Fortis) forklift is a compact and efficient industrial vehicle engineered for material handling tasks requiring a 3,500 lb load capacity at a 24-inch load center. This model features a PSI 2.0L, 4-cylinder LPG/gas engine with a displacement of 122.1 cubic inches, delivering 40 horsepower and 91 lb-ft of torque at 1800 rpm, balancing fuel efficiency with robust performance. Its electronic powershift transmission includes electronic inching and shift control, facilitating smooth operation and precise maneuvering. Dimensionally, the forklift measures approximately 7 feet in length to the fork face, with a mast lowered height near 6.9 feet and an overall width of about 3.3 feet, enabling operation in tighter warehouse aisles. The machine provides a ground clearance of 4 inches, a wheelbase of 4.3 feet, and a tight 6-foot turning radius, enhancing its agility in confined spaces. The forklift rides on cushion tires with two wheels at the front and two at the rear. The mast assembly supports a maximum fork height of approximately 10.7 feet, with lift and lower speeds of 114 ft/min and 93 ft/min respectively. Mast tilt angles are ±5 degrees, facilitating flexible load handling. The forklift can reach a maximum travel speed of 10.5 mph (16 kph), and it weighs about 6,724 lbs in operating condition. Additional ergonomic features include self-energizing drum brakes and a Monotrol® pedal for operator comfort and control, making the S35FT (Fortis) a reliable choice for indoor and light outdoor applications in material handling.