JCB VMT280 STATIC SMOOTH DRUM ROLLER

The JCB VMT280 is a static smooth drum roller designed for efficient compaction in construction and roadwork applications. It features dual smooth drums, each with a diameter of 27.6 inches and a width of 47.3 inches, delivering a static linear load of 64.2 pounds per inch for substantial ground pressure. The roller generates a centrifugal force of 8,090 lbs at high settings and vibrates at a frequency of 58 vibrations per minute with a nominal amplitude of 0.1 inches, ensuring effective soil and asphalt compaction. Powered by a Kubota D1403 diesel engine, the machine offers 29.2 horsepower at 2,600 rpm, with a three-cylinder, water-cooled, 1.393-liter displacement engine known for durability and reliability. It has an alternator providing 45 amps and operates on a 12-volt electrical system. Fuel capacity stands at 16.7 gallons, supported by a 1.5-gallon engine oil capacity and a 15.9-gallon hydraulic system fluid reservoir. The VMT280’s compact dimensions allow maneuverability on job sites, including a ground clearance of 11.1 inches, an overall width of 4.3 feet, an overall length of approximately 7.9 feet, and a wheelbase of 5.6 feet. Its operating weight is 6,063 lbs, and it reaches a maximum speed of 6.8 mph. The operator’s cab height is 5.7 feet, providing good visibility while maintaining a low center of gravity for stability during compaction tasks. This model balances powerful compaction capability, engine efficiency, and operator-friendly dimensions for versatile use in various paving and soil compaction projects.