Technical Description
The Kawasaki 80ZIV is a robust wheel loader designed for heavy-duty construction tasks, featuring a turbocharged 6-cylinder C-8.3-C engine delivering 178 hp at 2200 rpm and 557 lb-ft of torque at 1500 rpm. Its bucket capacity measures 3.7 cubic yards heaped and 3.3 cubic yards struck, with a breakout force of 34,390 lbs, making it suitable for substantial material handling. The bucket width is 9.2 ft, with a maximum dump clearance of 9.3 ft at full lift and a reach of 3.9 ft, optimizing loading efficiency.
With an operating weight of approximately 35,825 lbs, the loader has a wheelbase of 10.5 ft and overall dimensions of 25.6 ft in length, 8.9 ft in width over tires, and a cab height of 11.3 ft. It offers a ground clearance of 1.6 ft and a maximum hinge pin height of 13 ft, facilitating operations in rough terrain. The rear axle oscillates 24 degrees, enhancing maneuverability, supported by a turning radius of 20.9 ft.
The full powershift transmission provides four forward and four reverse gears, achieving a maximum forward speed of 21.7 mph and reverse speed of 22 mph. The hydraulic system, with a gear-type pump flow capacity of 18.7 gal/min at 3,000 psi relief pressure, enables fast cycle times with dump, raise, and lower times of 1.4, 6.6, and 3.4 seconds respectively. The loader runs on a 24 V electrical system with a 65 A alternator, supported by a fuel capacity of 63.5 gallons and hydraulic fluid capacity of 38.4 gallons, ensuring extended operation and reliability on site. Tire size is 23.5x25-16PR (L-3), suitable for rugged conditions.
