KITAMURA MYCENTER HX300IF HORIZONTAL MACHINING CENTER

The 2008 Kitamura Mycenter HX300iF is a high-performance horizontal machining center designed for precision and productivity. It features a 30 HP spindle motor with a CAT 40 taper running at speeds up to 15,000 RPM, providing robust cutting capabilities. The machine offers substantial travel distances: 18.11 inches on the X-axis, 20.08 inches on the Y-axis, and 18.11 inches on the Z-axis, accommodating a wide range of workpieces. It includes two pallets, each measuring 11.81 x 11.81 inches, with a combined load capacity of 880 lbs, enabling efficient workpiece changeovers and prolonged machining cycles. A 40-tool magazine supports a maximum tool diameter of 3.14 inches, tool length of 11.81 inches, and tool weight of up to 17.6 lbs, allowing versatile tooling options and extended production runs. Rapid traverse rates reach 1968.5 inches per minute on all axes with cutting feed rates from 0.04 to 1968.5 IPM, enhancing cycle times. The machining center is controlled by the Kitamura Arumatik-Mi control system for precise axis and spindle synchronization. The machine measures 126.77 inches long, 83.46 inches wide, and 102.36 inches high, weighing approximately 17,600 lbs, and requires a 45 KVA power supply. A 158.5-gallon coolant tank supports thorough cooling and chip evacuation during operations, maintaining thermal stability and tool life. This model is well-suited for high-precision machining in aerospace, medical, and general job-shop applications where reliability and accuracy are critical.