KOMATSU FB20SHG-6 SIT-DOWN FORKLIFT

The Komatsu FB20SHG-6 is an electric forklift designed for efficient material handling with a load capacity of 4,000 lbs and a load center of 23.7 inches. Powered by a 36V electric system, it provides smooth and reliable operation while reducing emissions in indoor or outdoor environments. The forklift features a dual-mast design with two sections, enabling a maximum fork height of 10.7 feet and lift speeds of 67 feet per minute, supporting productive lifting cycles. Its lowering speed reaches up to 96.5 feet per minute, with a mast tilt of 6 degrees forward and 8 degrees backward to facilitate safe load maneuvering. Dimensionally, the FB20SHG-6 offers a ground clearance of 4.2 inches, an overall length to fork face of 7.3 feet, and a compact overall width of 3.7 feet. The overhead guard height is 7.4 feet, with the mast lowered height at 7.2 feet, allowing it to operate efficiently in restricted spaces. It achieves a right angle stack height of 7.8 feet and a tight turning radius of 6.4 feet supported by a 4.9-foot wheelbase. Operating weight is approximately 9,100 lbs, with two front and two rear cushion tires optimized for smooth surface traction and stability on paved floors. The forklift can travel up to a maximum speed of 8.7 mph (13 kph), balancing speed and control for material transport within warehouses or manufacturing settings. Its cushion tires and compact design make it suitable for indoor use on hard surfaces, combining maneuverability, lifting performance, and electric efficiency for demanding industrial applications.