LINDE H 460 GPCH/2 SIT-DOWN FORKLIFT

The Linde H 460 GPCH/2 is a heavy-duty forklift designed for demanding industrial applications, featuring a robust diesel-powered drivetrain paired with advanced hydraulic and control systems. It is powered by a Cummins QSM11 engine, a 6-cylinder diesel unit with a displacement of 660.3 cu in, delivering 329.9 hp at 2100 rpm and 1234.7 lb-ft of torque at 1100 rpm, providing exceptional low-speed torque for powerful, efficient operation. The forklift’s operating weight is 132,564 lbs, enabling it to handle exceptionally heavy loads with a nominal load capacity of approximately 101,413 lbs at a 47.3 in load center. Dimensionally, the H 460 measures 25.5 ft in length to the fork face and has an overall width of 13.8 ft, with a wheelbase of 18.1 ft. It maintains a ground clearance of 13.6 in and a height to the top of the overhead guard of 11.3 ft, with an overall mast height of 23.7 ft when lowered. The forklift supports a maximum fork height of 23 ft and a maximum fork spread of 118.2 in, making it suitable for a variety of load sizes and stacking requirements. The mast features a tilt range of 5 degrees forward and 10 degrees rearward, allowing precise load positioning. This model is equipped with pneumatic 18.00x25/40 PR tires ideal for outdoor and rough-terrain use. It achieves a maximum travel speed of 15.5 mph and has a turning radius of 25 ft, balancing maneuverability and stability. The hydraulic system provides lift speeds of 78.8 ft/min and lower speeds of 98.5 ft/min, optimized for safety and efficiency. Its four front wheels and two rear wheels deliver balanced traction and weight distribution. The Linde H 460 GPCH/2 combines rugged construction and advanced diesel powertrain technology for reliable, high-capacity industrial forklift service.