MICHIGAN / CLARK CMP30 DIESEL SIT-DOWN FORKLIFT

The Clark Michigan CMP30 Diesel is a robust three-stage counterbalance forklift engineered for demanding material handling applications. Powered by a Yanmar 4TNV94 four-cylinder diesel engine, this machine delivers 59 horsepower at 2,500 rpm with 130 foot-pounds of torque, providing reliable performance across varied operating conditions. The forklift boasts a 6,000-pound load capacity at a 24-inch load center, with a maximum lift height of 10.9 feet and lift speed of 94 feet per minute, enabling efficient vertical stacking operations. Dimensionally, the CMP30 measures 8.9 feet in length to the fork face and 4.1 feet in overall width, with a compact 8.3-foot turning radius ideal for maneuvering in congested warehouse environments. The 5.6-foot wheelbase and pneumatic tire configuration provide stability and traction on both smooth and uneven surfaces. Operating weight is 9,224 pounds, supporting safe handling of maximum loads with predictable machine behavior. The three-stage mast features 8-degree forward and 10-degree rear tilt capability, with an 8-degree mast tip range accommodating various load placement requirements. Lift and lower speeds of 94 and 100 feet per minute respectively ensure productive cycle times. The machine achieves a maximum travel speed of 13 miles per hour, balancing operational efficiency with safety. With four pneumatic wheels and two driven rear wheels, the CMP30 provides reliable traction and directional control. Ground clearance of 4.8 inches and a right-angle stack height of 9.7 feet maximize utilization in warehouse applications with standard ceiling heights, making this forklift suitable for general-purpose material handling in manufacturing, distribution, and logistics facilities.