TEREX TL65 WHEEL LOADER

The Terex TL65 is a compact wheel loader with an operating weight of 9,040 lbs (4,101 kg) and a powerful 50 hp (37 kW) Deutz F4M 2011 four-cylinder engine operating at 2300 rpm. It features a hydrostatic transmission with two forward and two reverse gears, enabling a maximum speed of 12.5 mph (19 kph) in both directions. The loader’s bucket capacity ranges from 0.65 to 1.3 cubic yards (0.5 to 1 m³) with a bucket width of 5.6 ft (2 m), delivering a breakout force of 8,325 lbs (3,776 kg). Its lift capacity at ground level is approximately 7,425 lbs (33,028 N) and the disk relief valve is set at 3,625 psi. Dimensionally, the TL65 measures 15.7 ft (5 m) in length with the bucket on the ground, 5.5 ft (2 m) in width over the tires, and 8.6 ft (2 m) high to the top of the cab. The hinge pin reaches a maximum lift height of 10.3 ft (3 m) and dump clearance at max raise is 8.3 ft (2 m). It has a wheelbase of 6.4 ft (2 m), a turning radius of 12.7 ft (4 m), and ground clearance of 1.4 ft (0.44 m). The machine incorporates an oscillating rear axle with a 24° swing for stability and traction on uneven terrain, and it uses 365/70 R18 Mitas tires. The hydraulic system has an 11 gal/min (42 l/min) pump flow and a 13-gallon (49 l) fluid capacity, powered by a 12 V electrical system with a 19.9-gallon (72 l) fuel tank. The TL65’s articulation steering and compact width make it ideal for tight job sites in landscaping and construction environments.