ALZMETALL AX 4/SV UPRIGHT DRILL PRESS

The ALZMETALL AX 4/SV upright drill press is a robust industrial machine designed for heavy-duty drilling tasks. It features an 11.81-inch swing, enabling drilling up to 2.17 inches in mild steel, supported by a powerful 3.9 HP (approx. 3 kW) motor. Its spindle speed is infinitely variable, ranging roughly from 70 to 1500 RPM, allowing fine control for diverse materials and drilling conditions. The quill stroke is approximately 5.5 inches, providing sufficient vertical travel for deep holes in a single pass. The throat depth is about 11.8 inches, enabling work on wider panels or larger workpieces. The drill press is built around a sturdy 5.7-inch diameter column and includes a sizeable cast iron table measuring approximately 24.2 by 16.9 inches, with height adjustability between 5.5 and 26.4 inches, suitable for accommodating various workpiece sizes and angles. The overall dimensions include a machine height of about 72.8 inches and width near 31.5 inches, with a weight around 838 lbs, ensuring stability during operation. The spindle uses an MT4 short taper for tool holding. Safety and operational features include a lockable main switch with overload protection, motor heat protection, an emergency stop button, and an advanced mechanical variator for smooth speed changes. The machine also has a feed overload clutch and a digital RPM display, enhancing user control and protection. It meets IP54 protection class standards and uses Class F motor insulation, making it reliable and suitable for demanding industrial environments.