CLAUSING 20VS UPRIGHT DRILL PRESS

Technical Description

The Clausing 20VS Upright Drill Press features a 20-inch swing and a 1.5 horsepower, three-phase motor operating at 208-230 or 460 volts. It is equipped with a 3MT taper spindle and offers 6.5 inches of spindle travel, supported by a heavy-duty precision head with eight ball bearings, including a double row lower bearing to absorb radial and thrust loads. The drill press accommodates a maximum spindle-to-base distance of 43.375 inches, mounted on a 66-inch tall column with a 4-inch diameter and 3/16-inch wall thickness for enhanced rigidity. The base measures 15.5 by 13 inches, and the adjustable work table spans 22 by 19.5 inches with 1/2-inch cored T-slots spaced on 9-inch centers for secure clamping. The quill diameter is 2.5 inches. The machine supports manual feed drilling capacity up to 1.25 inches. Variable spindle speeds range typically from 150 to 2000 RPM via sheave pulley or electronic inverter drives, with optional features including an E-stop switch and forward/reverse control for flexible operation. The overall machine dimensions are approximately 22 by 36 by 69 inches, and weight ranges between 600 and 620 pounds. Additional operational benefits include a thread-adjustable depth stop, precision-ground table with coolant through capability, mesh top belt guard, and a telescopic spindle guard, facilitating safe, precise drilling tasks in varied industrial and production environments.