DELTA 15-665 UPRIGHT DRILL PRESS

The DELTA 15-665 Upright Drill Press is a benchtop single spindle machine featuring a 15-inch swing and a powerful 0.8 horsepower motor delivering 1,725 RPM standard speed. It offers six spindle speeds ranging from approximately 425 to 5,500 RPM, providing versatile drilling options for various materials. The drill press is equipped with a 1/2" Jacobs drill chuck (33-34C) mounted on a JT33 arbor taper, supporting precise bit holding. The spindle has a vertical travel (quill) of 6 inches, enabling deep drilling capacity. The column diameter is 2-3/4 inches with a spindle-to-column distance of 7-1/2 inches, allowing for stable and accurate operation. Its tilting table features 1/2" T-slots to accommodate workholding fixtures and angle adjustments. The head weighs approximately 72 pounds, contributing to machine durability, while the total weight is roughly 275 pounds, balancing stability with portability. The overall dimensions measure around 22 inches wide by 28 inches deep by 70 inches tall. Electrical requirements are 90VDC at 5.5 amps for variable speed models, often controlled via Dayton SCR controls for smooth speed adjustments. The 15-665 is well-regarded for home shops and light industrial use, combining robust construction with versatile speed settings suitable for a wide range of drilling tasks.