DYNAPAC CS1400 STATIC SMOOTH DRUM ROLLER

The Dynapac CS1400 is a static three-drum smooth roller designed for compaction tasks, primarily asphalt layers up to 50 mm thickness where vibration is unsuitable, such as near structures or bridges. It features a robust water-cooled turbocharged Deutz TD 3.6 L4 IIIB diesel engine producing 73.8 hp at 2600 rpm, ensuring reliable power for its 29,106 lb operating weight. The roller’s three drums are equally weighted to deliver a uniform static linear load of 286 pounds per inch, with a drum width of 82.7 inches providing comprehensive coverage. The machine incorporates failsafe multidisc parking brakes on all three drums and hydrostatic service brakes operable in forward and reverse, enhancing control and safety. Its articulated steering permits a steering angle of 35 degrees, alongside a compact turning radius of 12 feet inside and 19 feet outside, allowing maneuverability in confined spaces. An oscillating mechanism with ±9 degrees ensures even drum contact over uneven ground. Dimensionally, the CS1400 offers a ground clearance of 13 inches, an overall length of 188 inches, and a width of 3.5 feet, with a cab height nearing 9.9 feet. Equipped with a 140-gallon water spray tank, it optimizes surface wetting for smooth compaction. Fuel capacity stands at 29 gallons, enabling extended operation with a maximum speed of 9 mph. The combination of balanced weight distribution, three-drum drive and braking, and ample water spraying capability makes the Dynapac CS1400 a versatile, efficient static smooth drum roller suited for precise, non-vibratory compaction applications.