ERLO SEAR.25-MS UPRIGHT DRILL PRESS

The ERLO SEAR.25-MS Upright Drill Press is a robust industrial machine designed for precise drilling and tapping in mild steel with a maximum capacity of 0.98 inches (25 mm). It is powered by a motor delivering approximately 1.47 HP, with some variants ranging from 1.1 to 1.9 HP, providing variable speeds from 65 to 3060 RPM across 8 selectable steps, while other models offer up to 10 speeds between 245 and 4800 RPM. The drill press features a CM3 (MT3) Morse taper spindle and a 4.7-inch (120 mm) spindle stroke for versatile depth control. It accommodates tapping sizes from M18 to M22, supporting threading operations on medium-size bolts. Construction is industrial-grade cast iron, ensuring stability and vibration reduction during operation. The machine incorporates a V-belt transmission system with manual mechanical feed via a fine frontal feed wheel, allowing precise control over penetration rate. The worktable measures approximately 10.6 by 10.6 inches (270 x 270 mm), is fixed or adjustable in height with a spindle-to-table distance ranging from 3.34 to 25 inches (85 to 635 mm), and the column diameter is 3.94 inches (100 mm) with a 9.84-inch (250 mm) distance from spindle center to column. The base is roughly 23.6 by 15 inches (600 x 380 mm), lending solid support to the entire machine. Additional features include an adjustable depth stop, drill guard with micro switch for safety, optional coolant system, work light, tapping device, and digital speed readout. Depending on configuration, weight ranges between 200 kg (440 lbs) and 280 kg (616 lbs). The design supports both bench and cabinet mounting styles for flexibility in workshop layout.