HYSTER J90XN SIT-DOWN FORKLIFT

The Hyster J90XN is a robust electric forklift designed for demanding material handling tasks with a load capacity of approximately 9,000 lbs (8,999.3 lbs) and a load center of 24.1 inches. It operates on an 80-volt electrical system powered by a Hyster-manufactured engine delivering 19.7 hp (14 kW). The forklift features a hydraulic service brake system complemented by a spring-applied parking brake for reliable stopping power. Its pneumatic tires consist of 250 x 15 (20 ply) front tires and 7.00 x 12 (16 ply) rear tires, providing durable traction and stability. Dimensionally, the J90XN has a front tread range close to 44.3 inches and a rear tread of 45 inches, with a ground clearance of 5 inches and an overall width of 4.6 feet. Its height to the top of the overhead guard is 7.7 feet, with an overall length to the fork face about 9.6 feet. The turning radius is a tight 8 feet, facilitating maneuverability in confined spaces. The forklift’s wheelbase measures approximately 6.7 feet, aiding in balanced stability. The mast operates with lift speeds of 118 ft/min and lower speeds of 94 ft/min, with a forward tilt of 6 degrees and rear tilt of 8 degrees, optimizing load handling and operator visibility. The hydraulic system maintains a relief valve pressure of 2250 psi with an auxiliary hydraulic flow rate near 15.9 gallons per minute. Front axle load is approximately 8,911 lbs while the rear axle load is around 7,871 lbs. The vehicle’s maximum travel speed is roughly 10.7 mph, supporting efficient movement within operational environments. This forklift integrates features suited for performance, durability, and operator comfort in industrial settings.