IBERDRILL TL-25 UPRIGHT DRILL PRESS

The IBERDRILL TL-25 is a heavy-duty upright drill press designed for precision and versatility in metalworking applications. It features a maximum drilling capacity of 1 inch in mild steel and 1.18 inches in cast iron, with tapping capabilities up to 0.71 inches in steel and 0.87 inches in cast iron. The machine operates with a powerful 1.5 to 1.6 HP motor delivering speeds from 90 to 3360 RPM in manual feed mode, and up to 3672 RPM with auto feed across eight selectable speeds, allowing optimized performance for various materials and drill sizes. The drill utilizes a 3MT spindle taper and has a quill diameter of 2.44 inches with a spindle travel (drilling depth) of 4.72 inches. The TL-25 includes advanced features such as an automatic feed reversing system for tapping on RS models, a depth scale with adjustable depth stop for precision drilling control, and a thermomagnetic motor switch for protection. It also incorporates a spindle reversing switch, automatic tool ejector, emergency stop, high/low speed range selector, drill guard with microswitch, and manual spindle reversing switch. The adjustable worktable measures 10.6 by 11.8 inches, with a height range from 4.13 to 25.2 inches from spindle to table, supported on a robust 3.94-inch diameter column. The drill measures approximately 75.8 inches in height, with a 24 by 15-inch base, and weighs 408 lbs net (496 lbs shipping). It is designed for 230 or 460 volt three-phase power supply, suitable for industrial work environments requiring reliable throughput and precision.