JCB JS130W CRAWLER EXCAVATOR

The JCB JS130W is a robust mobile excavator designed for versatile construction and excavation tasks, featuring multiple boom and stick configurations for tailored performance. It offers maximum cutting heights ranging from 30.2 ft to 32.1 ft, maximum digging depths between 15.7 ft and 18.7 ft, and maximum reach along the ground from 25.5 ft up to 28.2 ft, depending on the chosen boom/stick option. The machine maintains consistent shipping dimensions with a height of 10 ft and length close to 25 ft across options. Powered by a turbocharged A4BGIT engine with a displacement of 264 cubic inches, it delivers a net power output of 94 horsepower (70 kW) at 2100 rpm from a four-cylinder configuration. The hydraulic system uses a load-sensed setup with variable flow piston pumps providing 65.6 gallons per minute flow, operating at relief pressures up to 4974 psi for efficient power delivery and control. Fluid capacities include 63.5 gallons of fuel, 32.8 gallons for hydraulic system fluid, and various capacities for engine oil and differentials. The excavator features a 24 V electrical system with a 40-amp alternator and is equipped with an oscillating axle allowing a 17-degree angle, enhancing maneuverability. It runs on twin 10x20 16PR or single 18Rx19.5 radial tires. The swing mechanism rotates at 13.4 rpm, and the hydrostatic powershift transmission offers two forward and two reverse speeds, reaching a maximum travel speed of 4.8 mph (6 kph). In terms of dimensions, the machine has a ground clearance of 1.2 ft, cabin height of 10 ft, and an overall width of 8.2 ft, optimized for urban and confined site work. This combination of power, reach, and mobility makes the JCB JS130W a highly capable excavator suited for diverse excavation demands.