1982 - 1985 JOHN DEERE 324H WHEEL LOADER

The John Deere 324H Wheel Loader is a versatile machine designed for efficient material handling and earthmoving tasks. It features a natural aspiration 4-cylinder 4045DF engine delivering 84 hp (63 kW) gross and 80 hp (60 kW) net power at 2400 rpm, with peak torque at 1200 rpm. The hydrostatic transmission provides two forward and two reverse gears, enabling a maximum travel speed of 17.4 mph (27 kph). The loader’s operating weight is approximately 15,520 lbs (7,040 kg), providing stability and strength during operation. The bucket has a breakout force of 17,754 lbs (8,053 kg), with a heaped capacity of 1.7 cubic yards (1.3 m³) and a struck capacity of 1.4 cubic yards (1 m³). The bucket width measures 7.9 ft (2.4 m), facilitating large material loads, and the dump clearance at maximum raise is 9.1 ft (3 m), enhancing operational reach. The loader dimensions include a ground clearance of 1.17 ft (0.36 m), a total length of 19.9 ft (6 m) with the bucket on the ground, and a height to the top of the cab of 10 ft (3 m). The wheelbase is 8.3 ft (2.5 m) and the width over tires is 7 ft (2.1 m), with 15.5-25 tires and a turning radius of 12.5 ft (3.8 m). The hydraulic system uses a gear pump with a flow capacity of 30 gal/min (114 L/min) and operates at a relief valve setting of 3045 psi. Cycle times include 4.3 sec to raise, 1.4 sec to dump, and 3.3 sec to lower the bucket. Fluid capacities include 37 gal (140 L) for fuel, 17.2 gal (65 L) for hydraulics, and 4 gal (15 L) for cooling system fluid. The rear axle oscillation is 24°, enhancing traction on uneven terrain. The loader operates on a 12 V electrical system with a 65 A alternator.