KENT INDUSTRIAL USA, INC. KLS-1840N HORIZONTAL MACHINING CENTER

The KENT INDUSTRIAL USA KLS-1840N horizontal machining center is a robust CNC lathe designed for precision turning operations with a maximum swing of 18 inches and a turning length of 39.4 inches. It features a 7.5 HP frequency drive spindle motor with an optional upgrade to 10 HP, capable of spindle speeds up to 2,000 RPM. The spindle supports a turning diameter maximum of 9.84 inches and is equipped with a 3-inch spindle bore, enabling machining of sizeable workpieces. The machine utilizes Fanuc 0i-mate TD CNC control with manual guide-i for ease of operation, paired with servo motors powering the X and Z axes for precise tool positioning. It offers a full enclosure with sliding front, side, and rear access panels for safety and maintenance convenience. The KLS-1840N provides substantial travel capacities across three axes: 315 inches each on the X, Y, and Z axes, with rapid traverse rates of up to 394 inches per minute, ensuring efficient material handling and cycle times. The unit features a 4-position programmable electric turret, an automatic lubrication system with metered check valves, and a programmable flood coolant system to maintain machining integrity. Constructed with FC-30 high-grade castings that are induction hardened and ground, the machine offers stability and wear resistance. Additional features include an 8-inch 3-jaw chuck, roller jaw steady rest, tubular work light, and a full set of operational manuals. Weighing approximately 5,720 lbs, the KLS-1840N is suitable for demanding industrial machining environments requiring moderate to heavy material removal and high precision.