Manford MF-1 VERTICAL MACHINING CENTER

This vertical machining center features a manual tool carrier with a single tool capacity designed for precise machining tasks. The worktable measures 42 inches in length and 9 inches in width, supporting a maximum workpiece weight of 200 lbs, suitable for moderate-sized parts. It operates with a vertical spindle equipped with an R8 taper, the standard taper angle of approximately 16.26 degrees, facilitating compatibility with a wide range of tooling and collets commonly used in milling operations. An optional #30 taper can also be accommodated. The spindle delivers a continuous power rating of 2.00 HP for 30 minutes, with an optional upgrade to 3.00 HP, and offers a top speed of 2,720 RPM, extendable optionally to 4,500 RPM, allowing versatility in handling various materials and cutting conditions. The machine operates with three axes (X, Y, Z), where the Y-axis has a travel of 12 inches and the Z-axis 5 inches; the X-axis travel is unspecified. The rapid traverse capability and maximum feed rate are configured for efficient positioning during operations. The spindle design allows for tapered tool holding with manual tool changes resulting in 0-second chip-to-chip time, emphasizing simplicity over automation. Overall, this vertical machining center combines moderate table dimensions, a standard R8 spindle taper, flexible spindle speeds, and manual tooling suited for small to medium workpiece machining requiring moderate spindle power and three-axis movement control.