NOMURA HBA 110T-R2 HORIZONTAL BORING MILL

The NOMURA HBA 110T-R2 is a high-performance Horizontal Boring Mill featuring a Full B Axis and a Fanuc 0iMd control system. The machine is equipped with a 40-tool Automatic Tool Changer (ATC). Its spindle boasts a 4.33-inch size, a No 50 7/24 Taper, and reaches a speed of 3,000 RPM, delivering a maximum torque of 790 ft-lbs and a maximum thrust of 3,305 lbs, powered by a 30 HP motor. The work envelope is defined by substantial travels: X-axis at 51.2 inches, Y-axis at 45.3 inches, Z-axis at 34.4 inches, and W-axis at 15.7 inches. The 45-inch x 45-inch table supports a maximum load of 6,600 lbs, with a minimum command indexing angle of 0.001 degrees and a rotation speed of 540 degrees/min. Rapid traverse rates for the X, Y, and Z axes are 472.4 inches/min, while the W axis traverses at 236.2 inches/min. The feed rate ranges from 0.04 inches/min to 236 inches/min. The machine stands 139 inches high and requires a floor space of 145 inches x 223 inches.