PRAKASH P25 UPRIGHT DRILL PRESS

The Prakash P25 Upright Drill Press is a robust automatic fine feed pillar drill machine designed for precision drilling and tapping operations. It offers a drilling capacity of 0.98 inches (25 mm) in mild steel and 1.26 inches (32 mm) in cast iron, with a tapping capacity of 0.79 inches (20 mm) in mild steel. The machine features an MT-3 spindle hole taper, 6.30 inches (160 mm) spindle travel, and a spindle speed range of 100–2650 RPM across 8 steps, ensuring versatility for various applications. The column diameter is 3.54 inches (90 mm), and the RAM diameter measures 2.83 inches (72 mm). The feed type is fine feed, providing accurate control during operation. The maximum distance from the spindle nose to the table is 22.05 inches (560 mm), while the spindle center to column distance is 8.11 inches (206 mm). The table size is 12.52 x 12.52 inches (318 x 318 mm), and the distance from the spindle nose to the base is 37.40 inches (950 mm). The machine measures 19.69 x 11.97 x 63.00 inches (500 x 304 x 1600 mm) and is powered by a 1 HP drill head motor. It uses a B-46 V-belt and is equipped with a motor pulley as a standard accessory. Optional accessories include an electrical motor, keyless drill chuck & arbor, V-belts, tapping control panel board, drill chuck & arbor, mechanical tapping attachment, and a coolant pump with coolant tank. The minimum order quantity is 1 unit.