ATUL LATHE AGL-2500 MANUAL LATHE

The ATUL LATHE AGL-2500 is an all-geared center lathe engineered for medium to heavy-duty turning operations. With a maximum swing of 17.78 inches over the flat bed ways and 10 inches over the cross slide, this machine accommodates a wide range of workpiece diameters. The 98.16-inch distance between centers enables extended job lengths, making it suitable for producing shafts, spindles, and other elongated components. The spindle bore of 2.04 inches provides compatibility with standard arbors and accessories. Powered by a 2.95 HP electric motor operating at a dual-speed configuration of 960-1440 RPM via V-belt drive, the AGL-2500 delivers consistent cutting performance across varying materials and operations. The lathe features a 12-speed spindle with a range of 40-1200 RPM, allowing precise speed selection for optimal tool engagement and surface finish. The headstock incorporates a 150mm spindle nose with MT-6 taper capability. The carriage and compound slide assembly utilizes cross slide dimensions of 200 x 280 mm with 250 mm travel, enabling accurate facing and grooving operations. The compound slide travel of 140 mm facilitates taper turning and angled cuts. Tool post sections accommodate 25 x 25 mm tool holders with multiple feed options from 4 to 24 TPI. Standard accessories include change gears, dead centers, chuck plate, and a Norton gear box option, while optional attachments such as taper turning devices and steady rests enhance versatility for specialized applications.