MAZAK INTEGREX 300IVS CNC LATHE

This dual-spindle turning center features a Mazatrol Matrix CNC control, the sixth-generation Mazatrol platform known for intuitive operation and advanced programming capabilities. The machine accommodates workpieces up to 60 inches between centers with a maximum swing over bed of 30 inches and turning diameter capacity of 29.92 inches. The primary spindle delivers 40 HP at 4,000 RPM with a 12-inch chuck and 3.46-inch bore, while the secondary spindle provides 35 HP at 4,000 RPM with a 9-inch chuck, enabling simultaneous machining operations. Both spindles accept 3-inch bar stock. X and Z-axis travels measure 24.80 inches and 62.41 inches respectively, with rapid traverse speeds reaching 1,496 IPM for efficient non-cutting movements. The 40-position tool turret provides comprehensive tooling capacity, while live milling functionality extends capabilities to 12,000 RPM for complex multi-axis operations. The Mazatrol Matrix control incorporates a 64-bit dual-processor architecture capable of managing substantial data loads during machining. This configuration supports conversational programming through SOLID MAZATROL, CAD integration, and virtual machining simulation, reducing programming time and setup errors. The combination of dual independent spindles, high rapid traverse rates, and advanced control features makes this machine suitable for high-production turning, multi-tasking operations, and complex part geometries requiring simultaneous spindle engagement and live milling capabilities.