MITSUBISHI EDM MV2400S WIRE EDM MACHINES

Technical Description

The Mitsubishi EDM MV2400S is a high-precision 3-axis wire electrical discharge machining (EDM) system featuring advanced capabilities for complex, accurate cutting operations. It offers X, Y, and Z axis travels of 23.6", 15.7", and 12.2" respectively, with additional U/V travels of ±3.0" each, enabling fine positional adjustments. The machine can accommodate workpieces up to 41.3" x 32.3" x 12.0" with a maximum weight capacity of 3,300 lbs. Its table measures 33.0" by 22.0" and supports a rapid feed rate of 51.2 inches per minute. Equipped with a resolution of 0.000002 inches (2 millionths), the MV2400S ensures exceptional machining accuracy, suitable for high-tolerance applications. It supports wire diameters from 0.004" to 0.012", with a standard size of 0.010", and requires a minimum wire thread start hole of 0.020". Wire tension is adjustable between 50 and 2,500 grams, with spooling speeds up to 11.8 inches per second to optimize cutting performance. The machine incorporates a dual paper cartridge filtration system with a 5-micron precision, alongside a 1 cubic foot ion-exchange resin capacity within a 227-gallon filter tank to maintain dielectric fluid cleanliness. Its dielectric system measures 34.4" x 90.5" x 61.7" and weighs 880 lbs. Overall machine dimensions are 105.8" x 119.3" x 84.6", and it weighs 7,716 lbs. The system utilizes Mitsubishi's M800 series control with a 19-inch touchscreen interface for enhanced usability and integration of advanced features such as non-contact magnetic drive transmission on the X and Y axes and taper capability up to 15° at 10.25 inches .