SOLBERGA SE2025 UPRIGHT DRILL PRESS

Technical Description

The Solberga SE2025 Upright Drill Press features a 20-inch swing with a drilling capacity of 1 inch in mild steel and a tapping capacity of 0.63 inches. It is powered by a 1.5 HP motor operating at 220V, 3-phase, 60 Hz, delivering spindle speeds from 130 to 3,480 RPM through an 8- or 9-speed gearbox. The drill press uses a 3MT spindle taper with a quill travel of 5.1 inches (130 mm) and a maximum spindle-to-table distance of 33 inches, allowing versatility for larger workpieces. The table measures 20 by 16 inches and can be raised or lowered vertically by 21 inches; it and the drill head can rotate 360 degrees around the 4-inch diameter steel column to enhance positioning flexibility. Optional manual or automatic power feed is available, with feed rates of 0.004, 0.006, and 0.012 inches per revolution, featuring an automatic feed overload for safety and efficiency. The machine’s gear drive employs fiber-to-steel mesh helical gears, ensuring smooth, quiet operation with minimal maintenance. Additional features include a built-in tool ejector for rapid tool changes, an electric thermal overload switch, no-volt-release protection, and emergency stop functions. The drill press weighs approximately 400 lbs, making it sturdy and stable for heavy-duty machining tasks in industrial, maintenance, or manufacturing settings. Optional accessories such as flood coolant, automatic reversing for tapping, foot pedals, and various table attachments are available to customize the machine to specific operational needs.