2015 HAAS UMC750P VERTICAL MACHINING CENTER

Technical Description

The 2015 Haas UMC750P is a 5-axis universal machining center with an integrated pallet changer, combining the large working envelope and simultaneous 5-axis contouring capability of the UMC750 platform with automated pallet exchange for improved spindle utilization and reduced operator intervention. Axis travels measure 30" in X, 26" in Y, and 25" in Z. The integrated trunnion table provides A-axis tilt and C-axis rotation for full 5-sided access and simultaneous 5-axis interpolation. The pallet changer allows one pallet to be set up and loaded offline while the machine continues cutting on the other, effectively eliminating setup time from the cycle time equation in production environments. The spindle is rated at 30 HP continuous with a maximum speed of 12,000 RPM on a CAT40 taper, providing the torque and speed range required for steel, titanium, Inconel, and aluminum across a wide range of part geometries. The machine is controlled by the Haas CNC control, providing conversational programming, ethernet connectivity, and a full suite of standard machining cycles. Standard features include a side-mount tool changer, rigid tapping, coolant system, and tool length measurement. The UMC750P is particularly well-suited to high-mix, medium-volume production environments where complex part families require frequent setups and where maximizing spindle uptime is a primary operational objective. Machine weight is approximately 30,000 lbs, reflecting the heavy cast-iron construction that provides the structural rigidity necessary for precise, repeatable 5-axis contouring.