Bridgeport EZ Trak DX Vertical Mill w/Rebuilt 2 HP Head, New Screen, Keypad & PDB

Bridgeport EZ Trak DX Vertical Mill with rebuilt 2 HP head. Comes with R8 taper spindle, chrome ways, auto lube system. New LED screen, keypad, and USB drive. Table: 9" x 48"; travel: 33.5" x 12" x 14". Spindle speed: 60-4200 RPM. Table Size-W - 9" Table Size-L - 48" Control - CNC (Bridgeport) Dimensions - 70" x 77" x 87" Weight - 3000 Bridgeport Series 1 EZ Trak DX Vertical Mill, Rebuilt 2HP Variable Speed Head (Top Half) R8 Taper Spindle, Chrome Ways, Many New Items Installed: New Led Screen, New Keypad, New USB Drive, Power Draw Bar, Auto Lube System, Table size: 9" x 48" Longitudinal travel: 33.5" Cross travel: 12" Vertical travel of knee: 14" Quill travel: 5" Spindle speeds: 60 to 4200 RPM (infinitely variable) Spindle quill feeds: 0.0015" – 0.003" – 0.006" Ram travel: 12" Positioning speed (X-Y axis): 100 inch / minute Feed rate range (X-Y axis): 0.1 to 100 inch / minute Throat: 6-3/4" to 18-3/4" Distance table to spindle nose: 2-1/2" to 18-1/4" Motor: 2 HP/1735 RPM Volts: 230/460 Currently wired for 230V 3 phase Phase: 3 Cycles: 60 Full load amps: 6.2/3.1 Approximate dimensions: 70" x 77" x 87" high Approximate weight: 3,000 lbs. Bridgeport Series 1 EZ Trak DX Vertical Mill, Rebuilt 2HP Variable Speed Head (Top Half) R8 Taper Spindle, Chrome Ways, Many New Items Installed: New Led Screen, New Keypad, New USB Drive, Power Draw Bar, Auto Lube System, Table size: 9" x 48" Longitudinal travel: 33.5" Cross travel: 12" Vertical travel of knee: 14" Quill travel: 5" Spindle speeds: 60 to 4200 RPM (infinitely variable) Spindle quill feeds: 0.0015" – 0.003" – 0.006" Ram travel: 12" Positioning speed (X-Y axis): 100 inch / minute Feed rate range (X-Y axis): 0.1 to 100 inch / minute Throat: 6-3/4" to 18-3/4" Distance table to spindle nose: 2-1/2" to 18-1/4" Motor: 2 HP/1735 RPM Volts: 230/460 Currently wired for 230V 3 phase Phase: 3 Cycles: 60 Full load amps: 6.2/3.1 Approximate dimensions: 70" x 77" x 87" high Approximate weight: 3,000 lbs. Bridgeport Series 1 EZ Trak DX Vertical Mill, Rebuilt 2HP Variable Speed Head (Top Half) R8 Taper Spindle, Chrome Ways, Many New Items Installed: New Led Screen, New Keypad, New USB Drive, Power Draw Bar, Auto Lube System, Table size: 9" x 48" Longitudinal travel: 33.5" Cross travel: 12" Vertical travel of knee: 14" Quill travel: 5" Spindle speeds: 60 to 4200 RPM (infinitely variable) Spindle quill feeds: 0.0015" – 0.003" – 0.006" Ram travel: 12" Positioning speed (X-Y axis): 100 inch / minute Feed rate range (X-Y axis): 0.1 to 100 inch / minute Throat: 6-3/4" to 18-3/4" Distance table to spindle nose: 2-1/2" to 18-1/4" Motor: 2 HP/1735 RPM Volts: 230/460 Currently wired for 230V 3 phase Phase: 3 Cycles: 60 Full load amps: 6.2/3.1 Approximate dimensions: 70" x 77" x 87" high Approximate weight: 3,000 lbs.