Bridgeport EZ Trak SX Mill w/Rebuilt 2 HP Head(upper), PDB, New Screen, USB

Bridgeport EZ Trak SX Mill features a rebuilt 2 HP head, new LED screen, USB, and power drawbar. Spec includes 9"x48" table, chrome ways, auto lube, and versatile travel. Powered for efficiency with 60-4200 RPM spindle speeds and extensive travel capacities. Table Size-W - 9" Table Size-L - 48" Control - CNC (Bridgeport) Dimensions - 70 x 77 x 87 Weight - 3000 Bridgeport Series 1 EZ Trak SX Vertical Mill, Rebuilt 2HP Variable Speed Head(Upper Half), Kurt Power Drawbar, R8 Spindle, Chrome Ways, New Led Screen, New Keypad, New Mother Board, New Static Hard Drive, New USB Drive, New X Axis Armature Cable, New Z Axis Scale, Auto Lube System, Table size: 9" x 48" Longitudinal travel: 33.5" Cross travel: 12" Vertical travel of knee: 14" Quill travel: 5" Spindle speeds: 60 to 4200 RPM (infinitely variable) Spindle quill feeds: 0.0015" – 0.003" – 0.006" Ram travel: 12" Positioning speed (X-Y axis): 100 inch / minute Feed rate range (X-Y axis): 0.1 to 100 inch / minute Throat: 6-3/4" to 18-3/4" Distance table to spindle nose: 2-1/2" to 18-1/4" Motor: 2 HP/1735 RPM Volts: 230/460 Currently wired for 230V 3 phase Phase: 3 Cycles: 60 Full load amps: 6.2/3.1 Approximate dimensions: 70" x 77" x 87" high Approximate weight: 3,000 lbs. Bridgeport Series 1 EZ Trak SX Vertical Mill, Rebuilt 2HP Variable Speed Head(Upper Half), Kurt Power Drawbar, R8 Spindle, Chrome Ways, New Led Screen, New Keypad, New Mother Board, New Static Hard Drive, New USB Drive, New X Axis Armature Cable, New Z Axis Scale, Auto Lube System, Table size: 9" x 48" Longitudinal travel: 33.5" Cross travel: 12" Vertical travel of knee: 14" Quill travel: 5" Spindle speeds: 60 to 4200 RPM (infinitely variable) Spindle quill feeds: 0.0015" – 0.003" – 0.006" Ram travel: 12" Positioning speed (X-Y axis): 100 inch / minute Feed rate range (X-Y axis): 0.1 to 100 inch / minute Throat: 6-3/4" to 18-3/4" Distance table to spindle nose: 2-1/2" to 18-1/4" Motor: 2 HP/1735 RPM Volts: 230/460 Currently wired for 230V 3 phase Phase: 3 Cycles: 60 Full load amps: 6.2/3.1 Approximate dimensions: 70" x 77" x 87" high Approximate weight: 3,000 lbs. Bridgeport Series 1 EZ Trak SX Vertical Mill, Rebuilt 2HP Variable Speed Head(Upper Half), Kurt Power Drawbar, R8 Spindle, Chrome Ways, New Led Screen, New Keypad, New Mother Board, New Static Hard Drive, New USB Drive, New X Axis Armature Cable, New Z Axis Scale, Auto Lube System, Table size: 9" x 48" Longitudinal travel: 33.5" Cross travel: 12" Vertical travel of knee: 14" Quill travel: 5" Spindle speeds: 60 to 4200 RPM (infinitely variable) Spindle quill feeds: 0.0015" – 0.003" – 0.006" Ram travel: 12" Positioning speed (X-Y axis): 100 inch / minute Feed rate range (X-Y axis): 0.1 to 100 inch / minute Throat: 6-3/4" to 18-3/4" Distance table to spindle nose: 2-1/2" to 18-1/4" Motor: 2 HP/1735 RPM Volts: 230/460 Currently wired for 230V 3 phase Phase: 3 Cycles: 60 Full load amps: 6.2/3.1 Approximate dimensions: 70" x 77" x 87" high Approximate weight: 3,000 lbs. https://www.youtube.com/watch?v=_FM79nspRUI