2012 MIKRON HSM400UL P VERTICAL MACHINING CENTER

Technical Description

The 2012 MIKRON HSM 400U LP is a 5-axis high-speed machining center from GF Machining Solutions featuring linear motor drives and integrated pallet automation for maximum productivity in precision electrode, insert, and die component manufacturing. The LP designation indicates both the linear motor drive system — replacing ballscrews for friction-free, higher-velocity axis motion — and the extended X-axis travel of 19.7 inches compared to the base HSM 400U's 15.75-inch stroke. Y and Z axes travel 9.44 and 14.17 inches respectively. The B-axis swivels ±110 degrees and the C-axis provides unlimited rotation for complete 5-sided access in a single setup. The HSK-E40 electro-spindle reaches 42,000 RPM at approximately 17 to 18 HP, enabling high-speed graphite, hardened steel, and precision aluminum machining. Rapid traverse rates of 61 to 80 m/min (2,402 to 3,150 IPM) on linear motor axes dramatically reduce non-cutting repositioning time during complex high-speed programs. The Heidenhain iTNC 530 HSCI control provides simultaneous 5-axis interpolation with high-speed look-ahead processing suited to die and mold finishing operations. The integrated pallet pool system — supporting 7 to 48 pallets using 320 x 320 mm System 3R or Erowa-compatible pallets — enables fully automated lights-out production of electrode and precision component families. At approximately 14,330 lbs, the machine delivers the structural rigidity and thermal management necessary for consistent sub-micron accuracy.